How To Fix Windows 2003 “Access Denied 5” Error

It’s worth checking out these repair tips if you’re getting the Windows 2003 Access Denied Error 5 error code.

This information describes the symptoms, causes, and options when Active Directory replication fails with error 5: Access denied.

Applies to: Windows Server 2012 R2
Original KB number: 3073945


error 5 access denied windows 2003

An Active Directory replication failing 5 may exhibit one or more of the following symptoms.

Symptom 1

The Dcdiag.exe command-line tool reports that all Active Replication directory validation fails with an error status code (5). It looks like the following report:

Test server: site_namedestination_DC_name
Check Origin: Replication
*Checking Replication
[Replications Check,Destination_DC_Name] Recent replication attempt failed:
From source_DC to destination_DC
Naming context: Directory_Partition_DN_Path
Replication error (5):
Access denied.
An error occurred on Date Date.Last
success occurred at the date and time.
There have been numerical errors since the last qualifying achievement.

Symptom 2

Dcdiag.exe command-line tool reports that running DsBindWithSpnEx produces error 5 when running DCDIAG /test:CHECKSECURITYERROR.

Symptom 3

REPADMIN.exe command-line tool reports last failed replication attempt with reputation 5.

REPADMIN commands that frequently cite the new five statuses include the following:

  • The following is an example of the output of the REPADMIN /SHOWREPL command. This output shows that inbound replication from DC_2_Name to DC_1_Name fails due to our “Access Denied” error.

    Site nameDC_1_Name
    DSA Options: IS_GC
    Site Options: (none)
    DSA object GUID: GUID
    DSA Call ID: Call ID

    Could not start service on local computer error 5 access is denied?

    This is usually due to a lack of permissions on the system. Therefore, most users can fix error 5: access denied simply by running a command or by publishing the installer with admin rights. In such cases, a couple of errors: fix access denied can be misleading in corrupted system files.

    ==== INCOMING NEIGHBORS=================================
    DC= domain name,DC=com
    Site_NameDC_2_Name on RPC
    DSA object GUID: GUID
    Last attempt to specify date and time failed, result 5(0x5):
    Access denied.
    <#> error continues.
    Last success in date and time.

    Symptom 4

    Five-state NTDS kcc events, general events, or Microsoft-Windows-ActiveDirectory_DomainService events are logged in the Directory Service report in Event Viewer.

    The following Active table lists directory events that often display status 8524.

    Event ID Source Event chain
    1655 General NTDS Active Directory tried to formulate the following global catalog, but our attempts were unsuccessful.
    1925 KCC NTDS Unable to establish a replication link for the next writable directory partition.
    1926 KCC NTDS Trying to set up a replication website on a read-only directory partition usually failed with the following settings.

    Symptom 5

    If someone right-clicks on the connection object from the actual source domain controller in Active Directory Sites and Services and then clicks Replicate Now, the process will fail or the following error message will appear ibke:

    Create a copy now

    The following error occurred while checking the naming synchronization of the %directorypartitionname% context from the source DC to the target DC:Access is indeed denied.

    How do I fix access denied error 5?

    Disable or change your computer’s antivirus software.Run the installer as an administrator.Switch your family account to a management profile.Enable the built-in administrator account from the command line.FromOpen the Add/Remove Program tool.Move the installer to the C: drive.

    The process will not continue.


    Use the Common Names DCDIAG command line tool to manage multiple tests. Use the DCDIAG /TEST:CheckSecurityErrors command-line tool to run accurate tests. (This includes testing and verifying the SPN entry.) Current testing is troubleshooting operational Active Directory replication issues with errors 5 and 8453. However, please note that this support does not work as part of the default DCDIAG runtime.

    1. On the DCDIAG command line on the local domain controller.
    2. Run DCDIAG/TEST:CheckSecurityError
    3. Start NETDIAG.
    4. Fix any existing bugs identified by DCDIAG and NETDIAG.
    5. First try the failed duplication operation. If replication still doesn’t work, see more information atCauses and solutions“.

    Suggests Solutions

    The following reasons may cause error 5 to appear. Some of them have a full range of solutions.

    Reason 1: The RestrictRemoteClients Value Displayed In The Registry Is 2

    If the policy setting Restricts for unauthenticated RPC clients is enabled but also set to No authenticated exceptions, the RestrictRemoteClients registry value is changed to 0x2 and HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoft Windows NT RPC< /code > registry subkey.

    This policy scope setting only allows Remote Formula Call (RPC) authenticated clients to connect if you want to establish RPC connections between these servers and the computer on which the procedure setting is applied. Doesn't support it for exceptions. If you select the above option, the system will not be able to accept remote anonymous RPC calls. This setting should never be manually applied to a domain controller.

    1. Disable the "Restrictions on Unauthenticated RPC Clients" policy as thisparameter limits the sale price of the RestrictRemoteClients entry to 2.


      The policy setting is configured in the following path: Computer ConfigurationAdministrative TemplatesSystemRemote Procedure CallRestrictions for Unauthenticated RPC Clients

    2. Also, delete the RestrictRemoteClients registry entry, and then restart your computer.

    See Restrictions for Unauthenticated Clients: rpc group policy where your domain is usually bypassed.

    Cause 2: The CrashOnAuditFail Setting In Any Game Controller Registry Of The Target Domain Is Set To 2

    CrashOnAduitFail with a value of 2 is thrown when the "Audit: Disable system immediately if reliability checks cannot be logged" policy setting is enabled in Group Policy and the local welfare event log is full.

    How do I fix access denied error in CMD?

    Run a handy command prompt as an administrator by simply right-clicking on the "Command Prompt" star in the Windows start menu and even selecting "Run as administrator". Click "Next" when you see the confirmation popup.At best, enter "net user manager /active: yes".

    Active Directory domain controllers are particularly vulnerable to peak capacity security when log checking is enabled and the size of the event prevention log is limited by the "Do not overwrite events (forshow event log). "Register manually)" and "Overwrite if necessary" in Event Viewer or its Group Policy equivalents.

    Reason 3: Invalid Statement

    How do I fix access denied error?

    Are you an administrator?Correct access denied errors by taking responsibility.Check the folder permissions.Check your antivirus settings.Look for file encryption.

    If Active Directory replication fails differently than domain controllers with different domain names, you should check the health of the trusted path relationship.

    You can use the NetDiag Trust Relationship interface to check for broken trust relationships. The Netdiag.exe utility identifies broken trust relationships only by displaying the following text:

    error 5 access denied windows 2003

    Fel 5 Atkomst Nekad Windows 2003
    Erro 5 Acesso Negado Windows 2003
    Fehler 5 Zugriff Verweigert Windows 2003
    Erreur 5 Acces Refuse Windows 2003
    Error 5 Acceso Denegado Windows 2003
    Errore 5 Accesso Negato A Windows 2003
    Fout 5 Toegang Geweigerd Windows 2003
    Blad 5 Odmowa Dostepu Windows 2003
    오류 5 액세스 거부 Windows 2003
    Oshibka 5 Dostup Zapreshen Vindovs 2003